Analog Devices AD630ARZ-RL

Single channel 3V/us 1MHz 1mV TO-99-8 Operational Amplifier ROHS

Anyone in the world

Mfr.Part.#:IRL540NSTRLPBF

Mfr:Infineon Technologies

CM.Part.#:C69201451

Package:D2PAK

Description:100V 33A 44mΩ@10V,16A 130W 2V@250uA 1 N-channel D2PAK MOSFETs ROHS

AD549JHZ

$20.00000

L293DD013TR

SOIC-20-300mil Stepper Motor Driver ROHS

$0.97000

AD630ARZ-RL

110dB SOIC-20-300mil RF Modulators and Demodulators ROHS

$9.30000

IRL540NSTRLPBF

100V 33A 44mΩ@10V,16A 130W 2V@250uA 1 N-channel D2PAK MOSFETs ROHS

$0.67000

OP2177ARZ-REEL7

SOIC-8 Precision Op Amps ROHS

$0.90000

C8051F349-GM

51Series QFN-325x5 Microcontrollers MCU/MPU/SOC ROHS

$7.00000

SN74ALS574BNSR

D-Type SOIC-20-208mil Flip Flops ROHS

$1.00000

ATGM336H-5N31

SMD,9.7x10.1mm GNSS Modules ROHS

$1.80000

FDP085N10A-F102

100V 96A 8.5m@10V,96A 188W 4V@250uA 1 N-Channel TO-220 MOSFETs ROHS

$1.20000

HX6096NL

1CT:1CT SMD-24P,18.2x12.2mm Pulse TransformersLAN ROHS

$1.40000

IRSM836-045MA

IC MTR DRIVER 13.5V-16.5V 36PQFN

$5.70000

DS90UB913ATRTVJQ1

WQFN-32-EP5x5 Serializers, Deserializers ROHS

$1.70000

Attribute	Value
Mfr.Part.#	IRL540NSTRLPBF
Manufacturer	Infineon Technologies
Product Category	MOSFETs
RoHS	Yes
ECCN	-
Package	D2PAK
Packaging	Tape & Reel (TR)
Standard Package	800
Weight	0

Anyone in the world

https://bit.ly/400c4p1

https://bit.ly/4fK8LZ5

[ Modified: Friday, 3 January 2025, 3:42 PM ]

AD630ARZ-RL - Analog Devices | Chipmall.com

Anyone in the world

Analog Devices AD630ARZ-RL

Mfr.Part.#:AD630ARZ-RL

Mfr:Analog Devices

CM.Part.#:C51055903

Package:SOIC-20-300mil

Description:110dB SOIC-20-300mil RF Modulators and Demodulators ROHS

Attribute	Value
Mfr.Part.#	AD630ARZ-RL
Manufacturer	Analog Devices
Product Category	RF Modulators and Demodulators
RoHS	Yes
ECCN	5A991B
Operating Temperature	-25℃~+85℃
Supply Current	5mA
Frequency range	-
Noise Figure	-
Gain	110dB
Supply Voltage	5V~16.5V
Package	SOIC-20-300mil
Packaging	Tape & Reel (TR)
Standard Package	1000
Weight	0.85

Anyone in the world

Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) and Eve Energy Co., Ltd. (EVE Energy), a leading manufacturer of lithium batteries, have signed a memorandum of understanding (MoU) aimed at developing comprehensive battery management system (BMS) solutions for the automotive market. Under the MoU, Infineon will supply a complete chipset that includes microcontroller units, balancing and monitoring ICs, power management ICs, drivers, MOSFETs, controller area network (CAN) products, and sensors. With these advanced solutions, EVE Energy’s battery management system will enhance safety, reliability, and cost optimization, while enabling more accurate monitoring, protection, and optimization of electric vehicle (EV) battery performance. DLE Engine This collaboration ultimately aims to improve the driving experience and energy efficiency.

“The rapid growth in electrification has increased the demand for advanced battery solutions. The partnership between Infineon’s sophisticated battery management ICs and EVE Energy’s cutting-edge battery technologies will pave the way for the next generation of intelligent battery packs,” stated Andreas Doll, Senior Vice President and General Manager of Smart Power at Infineon. “Infineon offers a comprehensive system-level solution that addresses the diverse needs of our customers. We believe that further collaboration will foster positive interactions and joint development at various levels.”

“EVE Energy has experienced significant growth in battery management systems in recent years, and we are committed to continuing this trajectory. Therefore, we highly value our partnership with Infineon,” said Liu Jianhua, co-founder and president of EVE Energy. “Our goal is to jointly introduce more advanced solutions that meet customer needs and drive the development of reliable and efficient systems.”

BMS Solutions from Infineon

Electrification and battery management systems are key focus areas for Infineon. The company boasts a complete portfolio for battery management systems, including both wired and wireless BMS solutions. The wired BMS solution leverages AURIX™, PMIC, and Balancing and Monitoring IC products, among others. The TLE9012DQU and TLE9015DQU provide optimized solutions for battery cell monitoring and balancing, combining excellent measurement performance with high-quality standards and robust applications. arrows jet These ICs are suitable for a wide range of industrial, consumer, and automotive battery applications, fulfilling safety requirements up to ASIL-D. Conversely, the wireless BMS solution utilizes Infineon’s latest low-power CWY89829 chip to create an interconnected mesh network, ensuring maximum node connectivity while maintaining sensor efficiency. Additionally, Infineon offers reliable LV MOSFET and EiceDRIVER™ solutions, including the 2ED2410 and 2ED4820 products, designed for future applications such as the electrification of 24V/48V BMS main switches.

https://bit.ly/fms-vier-90mm-jet

Anyone in the world

What is Hockey Tape?

Hockey tape is a staple in any hockey player’s bag. It’s a simple yet versatile material used for various purposes, from providing a better grip on a hockey stick to securing protective equipment in place. While it may seem trivial, having the right tape and understanding its proper application can make a significant difference in a player’s performance on the ice. We’ll explore the world of hockey tape, its types, uses, and some tips to get the most out of it.

Hockey tape is the most common of all tape and comes in a variety of colors. You can find hockey tape in every pro shop, ice rink, hockey store and most sporting good stores. There are many brands which come in different qualities and thicknesses. It is made of a cloth which can be used on any part of the hockey stick; most commonly the grip (knob) and the blade.

Types of Hockey Tape

Grip Tape

Grip tape, or more commonly used as surgical tape. It can be used on your knob to add extra grip and prolong the life of your gloves. Grip tape is very popular with NHL players. It also has a soft and spongy feel to it.

F22 jet

https://bit.ly/3ObVa1g

F35 Jet

https://bit.ly/3Od8GBE

F16 Jet

https://bit.ly/f16-jet

Viper 90mm Jet

Su27 Jet

https://bit.ly/fms-su27-jet

Cessna 182 https://bit.ly/cessna-182 https://bit.ly/cessna-182 F-86 Sabre F-86 Sabre F15 64mm jet https://bit.ly/4hWaxbF Xfly RC Jet https://bit.ly/3Z9aEt3 DLE 20 https://bit.ly/3V1kOJY Atten ms900 Atten ms900

https://bit.ly/4fH9Q3S

https://bit.ly/3VVNAMu

https://bit.ly/fms-vier-90mm-jet

Anyone in the world

According to VMR analyst, the Asia Pacific region is estimated to dominate the double-sided tape market during the forecast period. The Asia Pacific region, mainly China, South Korea, and Taiwan, dominates the worldwide electronics manufacturing sector. According to International Data Corporation (IDC), Asia Pacific (excluding Japan) accounted for 79.6% of worldwide electronics output in 2021. In China alone, the Ministry of Industry and Information Technology reported that the entire production of the electronic information manufacturing industry reached 12.6 trillion yuan (about USD 1.95 Trillion) in 2020, a 5.3% growth year on year. This huge electronics manufacturing base generates a high demand for double-sided tapes used in a variety of electronic components and gadgets.

Furthermore, the Asia Pacific region is rapidly urbanizing and developing infrastructure, resulting in increased demand for construction materials such as double-sided tapes used in building and restoration projects. The Asian Development Bank (ADB) predicts that Asia will need to invest USD 1.7 Trillion per year in infrastructure until 2030 to maintain its growth momentum. According to China’s National Bureau of Statistics, investment in real estate construction reached 14.76 trillion yuan (about USD 2.29 Trillion) in 2021, a 4.4% rise over the previous year. This current construction boom is driving up demand for double-sided tapes, which are utilized in a variety of construction applications, including panel mounting and flooring installation.

How Does the Rapid Growth in the eCommerce & Packaging Industry Drive the Growth in North America?

North America is estimated to exhibit substantial growth within the market during the forecast period. The e-commerce sector in North America has been rapidly expanding, generating demand for packaging materials such as double-sided tapes. According to the US Census Bureau, e-commerce sales in the United States exceeded $870.8 billion in 2021, up 14.2% from 2020 and 50.5% from 2019. The United States Department of Commerce reports that e-commerce accounted for 13.2% of total retail sales in 2021, up from 7.3% in 2015. The significant growth in e-commerce is driving up demand for double-sided tapes used in packing and shipping applications.

Furthermore, North America, particularly the United States, has a thriving aerospace and defense industry that extensively uses double-sided tapes in a variety of applications. According to the Aerospace Industries Association, the US aerospace and defense industry achieved USD 874 Billion in sales income in 2020, despite the pandemic’s impact. The Federal Aviation Administration (FAA) expects the overall commercial aircraft fleet to increase by 7.5%, from 7,690 in 2019 to 8,270 in 2040. This expansion in the aerospace industry increases demand for specialized double-sided tapes used in aircraft construction and maintenance.

Competitive Landscape

The double-sided tape market has a low level of concentration, with multiple companies vying for market share. Key industry players use strategies such as product launches, acquisitions, agreements, and alliances to maintain their positions and grow their global footprint.

Some of the prominent players operating in the double-sided tape market include:

3M
Nitto Denko Corporation
Tesa SE
Lintec Corporation
Avery Dennison Corporation
Lohmann GmbH & Co. Kg

In May 2023, Lohmann announced its new biobased range, DuploCOLL ECO, which makes use of TwinMelt, a solvent-free technology. This idea intends to make adhesive tapes with lower energy usage and emissions, responding to the growing demand for ecologically friendly products. The launch demonstrates Lohmann’s dedication to sustainability while increasing the efficiency of double-sided tapes in a variety of applications.
In April 2024, Nitto Denko Corporation announced that it would purchase a share of TruLife Optics (TLO). This strategic effort seeks to expand Nitto’s product offerings into emerging industries such as augmented reality, thereby improving its sales capabilities in the digital interaction space. The acquisition is consistent with Nitto’s “Nitto for All” strategy, which focuses on novel applications and market diversity.

F22 jet

https://bit.ly/3ObVa1g

F35 Jet

https://bit.ly/3Od8GBE

F16 Jet

https://bit.ly/f16-jet

Viper 90mm Jet

Su27 Jet

https://bit.ly/fms-su27-jet

https://bit.ly/4fH9Q3S

https://bit.ly/3VVNAMu

https://bit.ly/fms-vier-90mm-jet

Anyone in the world

The waterproof effect of waterproof tape depends on the integrity of the plastic film during the construction and operation process.

Since they are high molecular weight chemical fiber polymers, in order to prevent trampling by humans and animals or damage by animals and plants and avoid direct sunlight, waterproof tape should be supplemented with a corresponding protective layer. Waterproof tape is widely used and can be used for waterproofing joints of communication equipment base stations, antennas, spy wires, etc.,

as well as waterproof sealing protection of overhead insulated wire joints. Let’s learn more about it with the editor below.

Features of waterproof tape

1. Good conformability to irregular surfaces;

2. Good compatibility with various cables;

3. Self-melting tape;

4. Wide operating temperature range;

5. Excellent weather resistance and waterproof sealing performance;

6. Excellent bonding performance to copper, aluminum and cable sheath materials.

Classification and use of waterproof tape

The main purpose of waterproof glue is waterproofing, but waterproofing is also divided into many categories, roughly two categories, industrial waterproofing and home waterproofing.

If it is home waterproofing, it is recommended to use three-proof glue, which has good high and low temperature resistance; after curing, it forms a transparent protective film with excellent insulation, moisture-proof, leakage-proof, shock-proof, dust-proof, corrosion-proof, anti-aging, corona-resistant and other properties.

For industrial waterproofing, it is recommended to use the glue that my country will focus on developing, which are as follows:

Urea-formaldehyde glue with low formaldehyde emission: It is the adhesive with the largest output in my country. With the improvement of people’s living standards, the enhancement of quality awareness and environmental awareness, especially after joining the WTO, in order to occupy a place in the international market, it is imperative to produce urea-formaldehyde glue with low formaldehyde emission that meets international standards.

Polyurethane adhesive: It is widely used in shoemaking, construction, automobile and other fields, and is considered to be one of the most promising glues in China due to its excellent performance. In developed countries, polyurethane adhesives are used in shoemaking, and silicone and polyurethane adhesives are mainly used in building sealants. In addition, polyurethane adhesives are also used in food packaging and magnetic tapes, and their uses are very wide.

How to use PVC waterproof tape

1. The construction method of waterproof tape is based on the gap and seam width of the surface joints and the requirements of the engineering design, and the specifications and sizes are selected.

2. Wipe the surface joints and cracks clean.

3. Starting from one end of the surface crack, tear off the isolation paper on the asphalt tape and slowly open it along the joint in a straight line. Apply the asphalt tape to the joint and crack of the roof, and then gently press the asphalt tape with your hand to make the joint firmly bonded and tightly sealed.

Precautions for the use of waterproof tape

1. This regulation applies to sealing and waterproofing projects that use tape as waterproof roll material to bond civil structure roofs.

2. When designing or using waterproof tape, it should be carried out in accordance with relevant regulations or in reference to our company’s corporate standards.

3. Construction is required within the temperature range of -15℃-45℃ (corresponding measures should be taken when the temperature range is exceeded. When it is cold, it is best to heat the hatch surface and the adhesive side of the seal before use.)

4. The surface of the base must be cleaned or wiped clean, kept dry, and free of loose soil and oil.

5. The bonding area cannot be torn or peeled off within 24 hours after construction.

6. Tapes of different models and specifications should be selected according to actual project needs.

F22 jet

https://bit.ly/3ObVa1g

F35 Jet

https://bit.ly/3Od8GBE

F16 Jet

https://bit.ly/f16-jet

Viper 90mm Jet

Su27 Jet

https://bit.ly/fms-su27-jet

PET High Temperature tape

Anyone in the world

What is Hockey Tape?

Hockey tape is a staple in any hockey player's bag. It's a simple yet versatile material used for various purposes, from providing a better grip on a hockey stick to securing protective equipment in place. While it may seem trivial, having the right tape and understanding its proper application can make a significant difference in a player's performance on the ice. We'll explore the world of hockey tape, its types, uses, and some tips to get the most out of it.

Types of Hockey Tape

Grip Tape

Polyurethane tape (shin pad tape)
Shin tape
Polyurethane tape or “poly tape” or more commonly known as shin pad tape. It isn’t used too much on hockey sticks but can be used to add depth to your knob and protection against chips. I use a strip of colored poly tape on the hack zone of the bottom of my shaft so protect it from chipping and shaft damage. Although the most common is clear, Poly tape comes in a variety of colors so you can choose the right color to match your stick or socks.

Friction Tape
Friction tape is very sticky and can be used on either the blade or grip of your stick. It is used for extra grip while stick handling. Friction tape isn’t too popular.

Electrical tape

Electrical tape is similar to polyurethane tape but much thinner and more flexible. It can be used similar to poly tape. Electrical tape usually only comes in black and white. You can use it to tape the very top of your knob because its not as wide as the 1 inch tape and it is slightly harder than using regular tape for a sturdy pronounced knob.

Prowrap
Pro-wrap is normally used on the body to tape up joints (like wrists and ankles) to provide comfort while still giving the ability to have mobility. You can use pro-wrap underneath your grip to make it thicker with out adding weight. It also gives the grip a sponge-y feel.

Pre-made rubber grips
tacki mac
Last but not least are pre-made rubber grips. They look like real tape but are made from rubber. There are a few different brands and come in different grip styles. You can get it with a “rope” or finger slots, regular, a sandpaper feel, big knobs, small knobs, shorter ones and others. Some of the brands are Buttendz and Tacki-Mac. They are simple to install, save you from constantly taping your sticks and are much better for your gloves. They also have rubber options for your blades as well. They are great alternatives to regular cloth tape and really save you money.

How to Choose Hockey Tape?

Choose the Right Width: Hockey tape comes in various widths, usually 1" or 1.5". When taping a stick blade, it's essential to choose the right width to provide adequate coverage without too much overlap. For the handle, wider tape can offer more cushioning, while thinner tape allows for a more streamlined grip.

Replace Tape Regularly: Hockey tape tends to wear down over time, losing its grip and effectiveness. Regularly replacing the tape on your stick and equipment ensures optimal performance.

Tape Direction: When taping a stick blade, start at the heel and work your way to the toe. This direction ensures that the tape overlaps in a way that prevents it from peeling off during play.

Be Consistent: Find a taping method that works best for you and stick with it. Consistency helps develop muscle memory and improves overall performance on the ice.

Hockey tape may seem like an inconsequential accessory, but it's an essential tool for any hockey player. Understanding its types, uses, and proper application can greatly enhance your game, providing better grip, control, and protection. With this guide in hand, you're now well-equipped to navigate the world of hockey tape and make the most of this simple yet indispensable tool.

Aluminum foil fiberglass tape

Anyone in the world

What is Aluminum Foil Tape?

Aluminum Foil Tape is usually made with aluminum, but some foil tapes use lead or copper backings instead. Some foil tape varieties also contain glass, tin plating, or steel. The metal in foil tape gives it extra durability compared to plastic-based tapes. Most foil tapes can withstand temperatures between -40°F and 350°F. Since all the metals used in foil tape are relatively soft, the tape is highly malleable. The best foil tape combines the flexibility and protective qualities of aluminum, copper, and lead foil with a top-notch adhesive.

Aluminum foil tape is pretty tough. It maintains its integrity in very cold and very hot temperatures. This tape is commonly used to secure duct seams, connections, and joints. Additionally, it has excellent waterproof properties. These features allow aluminum foil tape to protect exteriors against the elements and harmful chemicals.

Aluminum foil tape is a shiny silver color. At Tape Jungle, it is sold in widths ranging from 1/2" (12 mm) to 12" (300 mm). You can purchase aluminum tape in rolls up to 800 M (875 yds) long.

Lead Foil Tape
Lead is famously heavy. As a result, lead tape is sometimes used to add weight to golf club heads and other sports equipment. It is highly malleable and easy to shape into artistic patterns. Lead foil tape is often used for protective masking during electroplating. In medical settings, it provides shielding from X-rays. Lead foil tape is an effective shield against electromagnetic forces and radio frequencies.

Lead foil tape is a dull silver, similar to duct tape. Tape Jungle's customers can buy it in widths from 1/4" (6.3 mm) to 4" (101.6 mm). The rolls are 36 yds long.

Copper Foil Tape
Electricians often use copper in their work because copper is extremely electrically conductive. Copper foil tape is great for repairing electrical cables and modifying printed wiring boards. It is a good soldering tape and conforms well to irregular surfaces. When paired with an acrylic adhesive, copper foil tape bonds firmly to surfaces and resists weather damage.

Copper foil tape is an attractive copper color. The tape resists tarnishing, so it won't become discolored like other copper products. The thinnest copper foil tape width available at Tape Jungle is 1/4" (6.3 mm), and the thickest width is 12" (304.8 mm). Each copper foil roll is 36 yds long.

Aluminum foil tape has a durable metal foil backing that adheres to a wide range of surfaces. The versatile tape is used in a variety of applications across many industries. Foil tape is a great choice for protecting items from cold weather, heat, rain, vermin, and heavy precipitation.

Linerless aluminum foil tape

Aluminium Foil Tape

What is Advantages of Aluminum Foil Tape?

Sealing Tapes and Wrapping Materials

When it comes to shipping products, the use of foil tape has been recommended by shipping companies since World War I for its durability and security. The tape creates a stronger seal than clear packing tape, and it stays secure even under harsh conditions.

Foil tape is a highly versatile high-tensile tape that can be made from aluminum, copper, or lead foil. It is also available in conductive and non-conductive variants, depending on the application.

Insulation, Repair & Jointing

Foil tape can be used in a variety of applications to insulate, repair and create seals on fiberglass, mineral thermal wood insulation, and other building materials. Its water resistance makes it safe to use on roofs and guttering, while its fire-resistant properties allow it to be used in many construction projects.

UL 723 Rated

Foil tapes are rated according to their flame spread properties, which are measured in terms of the rate of smoke production and rate of burning. This is a critical consideration when using them in construction, as the International Building Code requires that a composite material meet a flame spread rating of no more than 50.

Using Foil Tape to Repair and Insulate Electrical Wiring

The most common use for foil tape is for repairing electrical wires. The tensile strength of this tape provides a strong, permanent bond to electrical conductors. It can also be used to protect circuits and components from corrosion.

Electromagnetic Shielding

EMI shielding is an important function of aluminum foil tape, as it can effectively eliminate electromagnetic interference and isolate radio waves from harming the human body. It is widely used for electronics and computer devices, as well as mobile phones, PDAs, and other electronic equipment where EMI protection is essential.

Temperature & Moisture Resistant

Foil tapes are regularly exposed to temperatures of 35degF to 300degF, making them suitable for a range of indoor and outdoor applications. They can withstand moisture, chemicals, UV light, and solvents without compromising their performance.

Naikos offers a wide selection of aluminum tape, also known as foil tape and air conditioning duct tape. Its product line is designed to cover all key application areas where a strong, consistent quality sealing solution is required. The product range includes aluminum duct tape, aluminum insulated tape, and aluminum-backed duct tape for insulation, sealing, and creating vapor barriers.

Aluminium & Foil Tape for Insulation, Repair & Jointing

Aluminum foil tapes are an effective and cost-efficient way to insulate, seal and repair a variety of different construction materials. This is because the metal foil backing and synthetic rubber adhesive provide an excellent reflective barrier, keeping heat and moisture out and protecting delicate surfaces from damage.

Yousan TAPE is a professional industrial Aluminum foil tapes manufacturer with 18 years of production experience and a leading position in China. Their professional research team can produce compliant products that meet various testing regulations.

Yousan TAPE uses quality materials in their manufacturing process to ensure the durability and longevity of their Aluminum foil tapes . This ensures optimal performance even in harsh environmental conditions, making it suitable for both indoor and outdoor applications.

By choosing Yousan Tape China, you can be sure that you are working with a reputable manufacturer, contact us today for all your Aluminum foil tapes needs.